Anti-mould BDH-355M is a very safe and high effective antimicrobial
agent, with high safety to human and environment. BDH-355M is
stable to heat. It is specially designed for adhesive with strong
alkaline (such as natural emulsion with ammonia as a preservative),
high content of starch, water-based adhesive easily get mould.
Normal antimicrobial material loses effect in such a strong
alkaline adhesive, while BDH-355M keeps working very well.
Another outstanding property of BDH-355M is that it protects the
adhesive not only as in-can preservative, also when the adhesive
gets dry and forms a film. Bacterial and molds in the emulsion
can’t grow because they are inhibited by ammonia. But when the
emulsion gets dry, the ammonia is gone and the molds comes alive
again. Products made by bonding leather/textile with adhesive such
as shoes, bags easily get mould during storage or oversea shipping,
under high temperature and humidity, one cause ignored is that the
dry adhesive film absorbs humidity and becomes a good medium for
growth of molds inside. Molds grow quickly from inside to the
surface of product. At this moment, BDH-355M protects your products
and gives no chance to molds to grow. The protection is
Content: heterocyclic compound
Active content（%）： ≥25
Appearance: White suspension liquid
Particle size： < 40（μm）
Suspension rate（%）： ≧90
Stability： Stable under normal storage and under light. Disperse in
water at any rate
Strongly kills & inhibits fungus. Leads to no adaptability,
No volatilization, no hurt to environment.
Effective between pH3～10.
Stable under high temperature lower than 150℃.
Easily applied to product, non-flammable.
Low cost of antimicrobial.
The Minimum Inhibit Content (MIC) to normal fungus
BDH-355M is suggested to be applied to product at dosage of 0.5%.
Adequate mixing and good dispersion in product will provide
long-lasting antimicrobial effect.